The core of everything world-class is ‘Quality’ and at Divine Tubes, our commitment to quality applies to each product and each process. Our Research and Development facility is equipped with state-of-the-art facility to conduct metallurgical and mechanical tests to ensure highest standards of output.
We ‘ DIVINE TUBES PVT LTD.’ Is an ISO 9001: 2015, 14001: 2015, OHSAS 18001: 2007 Certified Company. (“DIVINE” is also holding certificates for quality in accordance with Pressure Equipment Directive [PED] 2014/68/EU and QA System approved acc. To AD 2000-MERKBLATT W0 and NORSOK) which is our constant endeavours towards achieving effective Quality Management Systems.
On the materials procurement front, we ensure that our raw materials are sourced from only trusted vendors of international repute. We further assure the implementation of strict quality protocols at each step of our production process and conduct post production tests as well, to reinforce our commitment towards quality.
This test is conducted to detect sub surface defects. It is carried out by using techno four flaw marking detection system on the entire length of the tubes as per the E426 with hole or notch standard.
Mechanical Testing adheres to ASTM standards and is conducted for tensile testing, flaring, flanging, flattening, reverse bend lest, etc.
We conduct 100% Hydro Testing on a hydraulic test bench using a high-pressure pump on all pipes & tubes. The tests also fully comply with ASTM A 249/ 13316 -1992 standards.
Even though this type of test is a supplementary requirement, we still conduct this test on all the tubes that we manufacture. We test our products by blowing compressed air into them to ensure there are no leaks or incomplete weldings.
We also offer our clients the facility of off-line Ultrasonic Testing. For this purpose, we have an in-house four-probe water emulsion system with a microprocessor unit to detect inconsistent process flow. In addition, the system can also mark the detected areas by spraying. We can provide facility to measure ferrite content, micro structure examination for grain size determination, and other such tests to fully satisfy our clients.
We carry out a full chemical testing of tubes and pipes as per the ASTM standards, on the latest optical Emission Spectrometers.
We can provide our clients with radiography testing facilities with an X-Ray unit that is at a short distance of 5 Kilometers form our unit. 5 Km Vicinity of plant.
To find out the susceptibility of products to intergranular corrosion attack or to measure rate of corrosion, we conduct the IGS test as per A-262 practice A B C or E in our NABL accredited laboratory or at any other independent laboratory as per the requirements of our clients.
For surface finish, dimension, checks on edges and the length are carried out on 100% tubes. Test ensures the straightness of the tubes as per the ASTM standards.